Diaphragm valve are quite the popular member of the valve family, especially within industrial manufacturing processes. Known for their superior performance as process flow regulation devices, these valves have one key and very simple component that differentiates them from other kinds of check valves and control valves: a flexible membrane from which they get their name. Similar to the human diaphragm, the partition of muscle and connective tissue that separates the chest and abdominal cavities and helps the lungs fill up with air then let it out, the stretchable valve diaphragm is made of elastomers, such as polypropylene and polyethylene, to effectively seal a process flow line either partially or completely as needed in order to regulate the transport of a given process stream. As the human diaphragm contracts and expands, air is inhaled and exhaled. As the valve diaphragm is lifted open or pushed closed, the process stream is allowed to pass or is blocked. The actuation of this ductile barrier makes these process valves capable of precision regulation for liquids, gases and semi-solid slurries.

The diaphragm can be actuated manually or automatically, utilizing electric, hydraulic or pneumatic engagement methods. are among the most commonly used automated diaphragm valves, as they only require the use of compressed air to expand and contract the diaphragm materials. Taking a look at the actual construction and operation of a diaphragm valve, it is easy to see why the rubbery durability and resilience of these materials is so integral. The cylindrical or spherical valve body, which houses the diaphragm and actuation device, is placed within a tank, tubing or piping system. Located at the bottom of the cylinder, the diaphragm is thick in the middle and thinner at the edges to allow for easy stretching. When the valve is open, the diaphragm is lifted up allowing fluids or gases to pass. When the valve is closed, the actuator engages a rod or piston known as the stem. This stem applies pressure to the diaphragm, pushing it towards the opposite wall of the piping. Each valve has two or more ports. Materials flow in through one port and out the other when the valve is not engaged. When an actuator is used to stretch the membrane of the valve, however, flow is limited or completely inhibited. The adaptability of the elastomeric material means it can be pulled and pressed over and over again without fail and can conform to the valve opening for a leak-proof seal