What would be the proper methodology for sizing a control valve with liquids flashing downstream?

First of all. I'm not an engineer and even I do not have any proper education. Also My english was broken (I'm self learner).I hope I can translate my questions, regarding to building some kind of dev

I'm building a 200-L fully automated, gas-fired pilot brewery. Here's the problem: I need to be able to remotely modulate the flame from a ~50,000-Btu/hr impinged jet gas burner via a potentiometer mo

I am working on PR2 testing ,i have a problem.API 6A Annex F (F1.8 b) notes that:1."Gas testing is required for equipment for rated working pressures of 69,0 MPa (10 000 psi) and higher "

Is there a correlation between Shell's fugitive emission specification SPE77-300 and the ISO 15848-2? We are being asked to provide valves that meet the Table 1, Class B, and Table 2 emissions on a pr

I was wondering if anyone can provide me with manufacturers (name, brand and location) of 4 offset Butterfly Valves - Quadruple Eccentric.

I am reviewing a big water pump station with the main suction and delivery steel pipes of 2000 mm (yes 2 meter)and 1400 mm respectively. There are five pumps in parallel and take their suction lines a

I am trying to understand what the limits are of pre-compressor methanol injection on turbocharged cars.From my understanding.....